? 2017 kingbright. all rights reserved. spec no: dsap1063 / 1203012734 rev no: v.1b date: 05/08/2017 page 1 / 4 descriptions the source color devices are made with ingan light emitting diode electrostatic discharge and power surge could damage the leds it is recommended to use a wrist band or anti-electrostatic glove when handling the leds all devices, equipments an d machineries must be electrically grounded features 1.6mmx0.8mm smd led, 0.45mm max. thickness low power consumption wide viewing angle ideal for backlight and indicator package: 2000 pcs / reel moisture sensitivity level: 3 rohs compliant applications backlight status indicator home and smart appliances wearable and portable devices healthcare applications attention observe precautions for handling electrostatic discharge sensitive devices package dimensions aphm1608vrbxf/a-5mav 1.6 x 0.8mm smd chip led lamp recommended soldering pattern (units : mm; tolerance : 0.1) notes: 1. all dimensions are in millimeters (inches). 2. tolerance is 0.1(0.004") unless otherwise noted. 3. the specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 4. the device has a single mounting surface. the device must be mounted according to the specifications. notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. luminous intensity / luminous flux: +/-15%. 3. luminous intensity value is traceable to cie127-2007 standards. selection guide part number emitting color (material) lens type iv (mcd) @ 5ma [2] viewing angle [1] code. min. max. 2 1/2 aphm1608vrbxf/a-5mav blue (ingan) yellow fluorescent 160 v 80 120 w 120 180
? 2017 kingbright. all rights reserved. spec no: dsap1063 / 1203012734 rev no: v.1b date: 05/08/2017 page 2 / 4 absolute maximum ratings at t a =25c electrical / optical characteristics at t a =25c aphm1608vrbxf/a-5mav parameter symbol emitting color value unit min. typ. max. chromaticity coordinates x i f = 5ma x [1] blue - 0.20 - - chromaticity coordinates y i f = 5ma y [1] blue - 0.15 - - capacitance c blue - 100 - pf forward voltage i f = 5ma v f [2] blue 2.5 - 2.6 2.6 - 2.7 2.7 - 2.8 2.8 - 2.9 2.9 - 3.0 3.0 - 3.1 reverse current (v r = 5v) i r blue - - 50 ua temperature coefficient of x i f = 5ma, -10c t 85c tc x blue - -0.15 - 10 -3 /c temperature coefficient of y i f = 5ma, -10c t 85c tc y blue - -0.18 - 10 -3 /c temperature coefficient of v f i f = 5ma, -10c t 85c tc v blue - -3 - mv/c v parameter symbol unit power dissipation p d 120 mw reverse voltage v r 5 v junction temperature t j 115 c operating temperature t op -40 to +85 c storage temperature t stg -40 to +85 c dc forward current i f 30 ma peak forward current i fm [1] 100 ma thermal resistance (junction / ambient) r th ja [2] 430 c/w thermal resistance (junction / solder point) r th js [2] 300 c/w value electrostatic dischar ge threshold (hbm) - 250 v notes: 1. 1/10 duty cycle, 0.1ms pulse width. 2. r th ja ,r th js results from mounting on pc board fr4 (pad size 16 mm 2 per pad). 3. relative humidity levels maintained between 40% and 60% in production area are recommended to avoid the build-up of static e lectricity ? ref jedec/jesd625-a and jedec/j-std-033. notes: 1. measurement tolerance of the chromaticity coordinates is 0.01. 2. forward voltage: 0.1v. 3. excess driving current and / or operating temperature higher than recommended conditions may result in severe light degradat ion or premature failure.
? 2017 kingbright. all rights reserved. spec no: dsap1063 / 1203012734 rev no: v.1b date: 05/08/2017 page 3 / 4 technical data blue 0.5 0.5 90 15 0 30 45 60 75 -15 -30 -45 -60 -75 -90 0.0 1.0 1.0 t a = 25 c spatial distribution aphm1608vrbxf/a-5mav cie chromaticity diagram notes: shipment may contain more than one chromaticity regions. orders for single chromaticity region are generally not accepted. measurement tolerance of the chromaticity coordinates is 0.01. 0 2 4 6 8 10 2.0 2.4 2.8 3.2 t a = 25 c forward voltage (v) forward current (ma) 0.0 0.5 1.0 1.5 2.0 2.5 0246810 t a = 25 c forward current (ma) luminous intensity normalised at 5 ma 0 10 20 30 40 50 -40-20 0 20406080100 ambient temperature (c) permissible forward current (ma) 0.0 0.5 1.0 1.5 2.0 2.5 -40-20 0 20406080100 ambient temperature (c) luminous intensity normalised at t a = 25 c forward current vs. forward voltage luminous intensity vs. forward current forward current derating curve luminous intensity vs. ambient temperature x y bvt1 0.2047 0.1728 0.1970 0.1552 0.2168 0.1493 0.2244 0.1663 bvt2 0.1970 0.1552 0.1895 0.1383 0.2095 0.1330 0.2168 0.1493 bvt3 0.1895 0.1383 0.1824 0.1221 0.2025 0.1172 0.2095 0.1330 0.08 0.10 0.12 0.14 0.16 0.18 0.20 0.14 0.16 0.18 0.20 0.22 0.24 0.26 x y bvt2 bvt3 bvt1
? 2017 kingbright. all rights reserved. spec no: dsap1063 / 1203012734 rev no: v.1b date: 05/08/2017 page 4 / 4 aphm1608vrbxf/a-5mav tape specifications (units : mm) reel dimension (units : mm) reflow soldering profile for lead-free smd process notes: 1. don't cause stress to the leds while it is exposed to high temperature. 2. the maximum number of reflow soldering passes is 2 times. 3. reflow soldering is recommended. other soldering methods are not recommended as they might cause damage to the product. precautionary notes 1. the information included in this document reflects representative usage scenarios and is intended for technical reference on ly. 2. the part number, type, and specifications mentioned in this document are subject to future change and improvement without no tice. before production usage customer should refer to the latest datasheet for the updated specifications. 3. when using the products referenced in this document, please make sure the product is being operated within the environmental and electrical limits specified in the datasheet. if customer usage exceeds the specified limits, kingbright will not be responsible for any subsequent issues. 4. the information in this document applies to typical usage in consumer electronics applications. if customer's application ha s special reliability requirements or have life-threatening liabilities, such as automotive or medical usage, please consult with kingbright representative for further assistance. 5. the contents and information of this document may not be reproduced or re-transmitted without permission by kingbright. 6. all design applications should refer to kingbright application notes available at http://www.kingbrightusa.com/applicationnotes packing & label specifications
|
